25-20SS Cadet
Some years back, I managed to acquire several BSA cadet actions, and had the cash on hand to play with them. One was relined and chambered for the 25-20SS cartridge. Then, I had a new stock made of...
View ArticleRe: 25-20SS Cadet
Ed,You are probably aware of Liberty, just across the creek from you. (503 640 5518) They have a special offer to cast bullets from a mould that you buy. They keep the mould and give you its value in...
View ArticleRe: 25-20SS Cadet
Ross; Thanks for the reminder about Liberty and their mould policy. I knew of it, because I supplied them with a CBE mould for .310 Cadet. Hoch makes the 25 Hudson mould, but I would rather buy a few...
View ArticleRe: 25-20SS Cadet
Would the 25-20 rechamber to the 25 Classic? That'd make a really great Cadet cartridge! TDLefty
View ArticleRe: 25-20SS Cadet
TD: I am not familiar with the 25 Classic> AllI know is courtesy CW Miller; based on 30 Herrett necked to 25 caliber, case length of 1.6".I just measured one of my Bertram 25-20SS cartridges, and...
View ArticleRe: 25-20SS Cadet
Ed,Do you suppose that Hoch would recommend a mould buyer who might make you a few?Regards from Darkest California,Ross
View ArticleRe: 25-20SS Cadet
I knew that the 25 Classic was larger in diameter than the 25/20SS, but never guessed it was shorter. But I'll bet that .03" difference would make no practicle difference at all. My consideration was...
View ArticleRe: 25-20SS Cadet
Not familiar with the .25 Classic, but have you considered 25-35 Winchester? Enough body taper to load in a Cadet, based on the 30-30, so you could make brass from 30-30 if necessary, just load the...
View ArticleRe: 25-20SS Cadet
Nothing wrong with the 25-35. And the dies are cheaper. But, the 25 Classic would be a simpler rechamber.The 25 Classic is not the 25/20. It's the 30 Herrett necked to 25. TDLefty
View ArticleRe: 25-20SS Cadet
My experience with rechambering a .25-20 SS reline in a Hepburn was not a pleasant one. The reamer broke through the liner.You already have the brass and only want to try a tapered Hudson bullet....
View ArticleRe: 25-20SS Cadet
Ross, et al:I would not think of rechambering my 25-20SS cadet, as it is indeed in a relined barrel. I would definitely consider the 25-35 on a cadet action, and it is indeed on my to do list. 38Spl...
View Article
More Pages to Explore .....